Phone: 1- 413- 566- 0037
Engine Rebuilding Equipment - Automotive Equipment - Machine Shop Equipment
Phone: 1- 413- 566- 0037
Kwik-Way FN Boring Bar
Standard automotive and light truck cylinder boring bar offers two speeds and two feeds which provides four combinations for boring versatility. Boring Bars are backed by our exclusive 3 year limited warranty.
Available in standard, portable version or air-centering version. The air-centering version is for use with 054HD Boring Fixture and Air Float Plate.
Screw feed with fast retraction
V-belt spindle drive
Quick, positive, anchoring
Three finger centering
Kwik-Way
FWSII Boring Bar
Model FWSII Boring Bar is especially suited for boring chain saw, go-cart, lawn mower, marine and motorcycle cylinders.
Bore capacity of 1-3/4" to 3-3/4" (44-95mm)
Three finger centering
Two feed and speed combinations
Exclusive 3 year limited warranty
Rottler F8A High Speed Boring Machine
This heavy-duty machine was designed for standard and large capacity machine work. The spindle diameter has been increased to 3.25" (8.2mm) for extra heavy duty machining up to 9" (230mm) bore size. Large sleeve cuts can be taken at high spindle rpm's, and in many blocks, one pass sleeve cuts are possible to increase productivity. Floor -to-floor bore a V8 block in 15 minutes. Bore through a 6 inch bore 4 inch in diameter in 35 seconds, .250 sleeve cuts are not a problem. Tooling is available from 1.500 to 9 inches in diameter. Straight through and blind hole boring tools are available. Simple controls and independent drives for the feed and spindle rotation. Precision ball screws on the feed give the ultimate feed control.
Rottler F7A High Speed Boring Machine
Kwik Way FN Cylinder Boring Machine
Kwik Way FWSII Cylinder Boring Machine
FWSII Boring Bar Price: $8,898.00 1291 Boring Stand Price:$2,118.00
CALL FOR CURRENT SPECIAL PROMOTION
FN Boring Bar Price: $12,096.00 054 Boring Stand Price:$4,329.00
CALL FOR CURRENT SPECIAL PROMOTIONS
This heavy-duty machine was designed for standard and small capacity machine work. The spindle dia allows for 2.8 - 5.0 with standard cutterhead. Floor -to-floor bore a V8 block in 15 minutes. Bore through a 6 inch bore 4 inch in diameter in 35 seconds, .150 sleeve cuts are not a problem. Tooling is available from 1.500 to 6.00 inches in diameter. Straight through and blind hole boring tools are available. Simple controls and independent drives for the feed and spindle rotation. Precision ball screws on the feed give the ultimate feed control.
Boring Bar 2.68 - 5.00 Package $40,178 Optional Bore range from 1.500 inch and
5.00 to 9.00 inch
Boring Bar 2.6 - 5.00 Package $45,000 Optional Bore range from 1.500 inch to 8.00
Cylinder Boring Machines Boring Bars Boring Stands
