Hines Crankshaft Balancers : Dominator

This Web site created, edited and maintained by:http://www.amsequipmentsales.com

send all questions or comments to john@amsequipmentsales.com

Crankshaft Balancers - Crankshaft Balancing - Accessories

Hines Dominator Crankshaft Balancer

Drill Press Option

The Mill/Drill Combination allows the operator to make necessary corrections without leaving the machine. The drill can be purchased without a mill table.

The mill/drill head rotates 180 degrees to accommodate the separate functions: mill pistons and rod ends, or drilling and tapping operations, all with the same machine. Optional features:

Digital Depth Encoder Option

A digital measuring instrument which is mounted to the face of the drill which allows the operator to measure depth. Available on Eliminator, Dominator, & Liberator.

Flywheel Mandrel

The Hines Dominator Balancer utilizes a rugged hard-bearing suspension that gives high sensitivity and permanent calibration. Part set ups are menu driven, allowing an operator to quickly change between single- and two-plane balance operations. With the addition of the drill option, on-machine corrections are fast, accurate and easy. The balancer will calculate amount, angle and multiple-hole corrections.

Typical System

The Dominator Balancer uses proprietary software developed by Hines Industries. The software in conjunction with leading edge electronics provides a system that is fast, accurate and easy to use. Part setup is quick with the menu based system. Setup options include measurements in either inches or centimeters, weights in either ounces or grams and plane or radius dimensions. Part setup and bobweight information can be printed and stored for future reference.

Dominator Balancer Computer System

Compumatch®

Bobweight calculation can be time consuming. The Hines COMPU-MATCH program automates this process. Special programs have been developed that record scale information to the bobweight card. COMPU-MATCH also calculates the number of weights required to build the bobweight.

Upon completion of the balance job the operator can save this information for future reference with the push of a button. You also have the option to print the information for customer review. The bobweight card and balance page provide a great verification tool for all jobs. Customers can see all bobweight information including before and after balance results which are time stamped

Graphic Depth Encoder Option

The graphic depth encoder ties correction amounts generated by the balancer with the quill on the drill. The operator simply moves the drill to the desired location, pushes a button to zero the encoder, and then views the graph showing the correct depth.

Calculations are tied to a user-defined drill table which includes drill bit size, maximum depth of hole, spacing when making multiple hole corrections, and whether it is an axial or radial correction. Available on Dominator or Liberator.