Hines Crankshaft Balancers : Eliminator

This Web site created, edited and maintained by:http://www.amsequipmentsales.com

send all questions or comments to john@amsequipmentsales.com

Hines Eliminator Crankshaft Balancer

The Eliminator Crankshaft Balancer is only budget minded in price, not performance. It features new digital control technology from the company that has set the measures of performance for over 20 years. A rugged hard-bearing suspension that gives high sensitivity and permanent calibration. Part set ups are menu driven, allowing an operator to quickly change between single and two-plane balance operations. The balancer will calculate amount and angle.

Controller Features

240 x 128 LCD with wide viewing angle and CFL backlighting.

Heavy-Duty one-piece keypad for protection against moisture and dirt ingress.

Easy-to-use controls all in one location

Completely backwards compatible with older Hines Balancers.

Easily adapted to suit other applications

Outstanding reliablity .

110-240V AC operation with fused and switched inlet .

Drill Press Option

The Mill/Drill Combination allows the operator to make necessary corrections without leaving the machine. The drill can be purchased without a mill table.

The mill/drill head rotates 180 degrees to accommodate the separate functions: mill pistons and rod ends, or drilling and tapping operations, all with the same machine. Optional features:

Milling, drilling, and tapping

Workpiece capacity:

cast iron @ 1-9/16"

mild steel @ 1-1/4"

Massive 3" diameter quill .

5" spindle stroke.

Head tilts 90 degrees right and left

Lowest tool speed - 60 rpm (60Hz)

R8 collet accepts Bridgeport tooling .

Digital Depth Encoder Option

A digital measuring instrument which is mounted to the face of the drill which allows the operator to measure depth. Available on Eliminator, Dominator, & Liberator.