Phone:  1- 413- 566-0037
This Web site created, edited and maintained by:http://www.amsequipmentsales.com
              send all questions or comments to john@amsequipmentsales.com
Engine Rebuilding Equipment - Automotive Equipment - Machine Shop Equipment

Phone:  1- 413- 566-0037
Rottler H86A CNC Touch Screen 2300 lbs
The H86A gas an Automatic Lower Crash Protection System. Many Engine Blocks have interference in the lower area of the bores and can damage honing stones and holders. Everytime the H86A starts honing a cylinder, the machine will check bores for interference avoiding potential damage to honing stones and holders. Variances in lower bores are common. Rottler H86A Control senses lower bore interference prior to rotation and stroking stroking motion starting at full power, eliminating any stone or holder damage.
Automatic Honing Stone retract at End of Cycle – the machine will automatically retract the stones during last stroke so that the stones do not leave any scratches or marks in the bore.
Automatic Cross Hatch Angle System – the machine will automatically adjust parameters to programmed cross hatch angle and finish the bore to programmed angle.

Automatic Roughing and Finishing Load Sensing System - machine controls load/pressure that the honing stones exert against the cylinder wall and reduces load during finishing cycle.