This Web site created, edited and maintained by:http://www.amsequipmentsales.com
send all questions or comments to firstname.lastname@example.org
Engine Rebuilding Equipment - Automotive Equipment - Machine Shop Equipment
Rottler H87AXY CNC Touch Screen 2300 lbs
Special Heavy Duty Version High Production Machine that can move automatically in both X and Y axis for automatic honing offset cylinder blocks. Automatic Lower Crash Protection System – every time cycle start is activated, the machine will check that the stones will not interfere with lower bore before starting rotation and stroking preventing stone and stone holder damage.Spindle Taper with Quick Change System - change hone heads in seconds without any wrenches. Automatic Honing Stone retract at End of Cycle – the machine will automatically retract the stones during last stroke so that the stones do not leave any scratches or marks in the bore.
Automatic Cross Hatch Angle System – the machine will automatically adjust parameters to programmed cross hatch angle and finish the bore to programmed angle. Automatic Roughing and Finishing Load Sensing System - machine controls load/pressure that the honing stones exert against the cylinder wall and reduces load during finishing cycle. Automatic Short Stroke and Dwell - machine detects tight area and short stroke or dwells. Automatic Stone Feed-out System - once hone head is positioned in the bore, the machine automatically expands stones and rotates slowly before starting hone cycle. Automatic Plateau Finish Program - the machine automatically expands plateau stones/brushes to programmed load and counts down number of plateau strokes, then withdraws the stones/brushes and retracts the hone head to the clearance position.