Soda Blasters - Baking Soda-Media Blasters
1-(413) 566-0037
1-(413) 566-0037
Soda Blasting Cabinet
Cleaning Options: Soda Blasting

Many of today’s small parts can be easily damaged by aggressive cleaning procedures such as shot blasting or even glass beading. However, cleaning parts by blasting the surface with sodium bicarbonate (baking soda) has become a popular alternative to other traditional blast media.Soda desolves in water and therefore will not result in damage to intricate parts suchas over head cam cylinder heads. Engine builders have been utilizing Bacon Soda Blasting to succesfully resolve these issues.
CABINET: Constructed of high quality 14 gauge, reinforced steel, with a working area of 48"W X 24"D X 24"H.

INSIDE BLAST AREA: 48" WIDE X 24" DEEP X 24" HIGH (nominal)

WINDOW: Safety tempered, 12 1/2" x 21" with quick change window frame replacable with no tools.

WORK SURFACE: A removable grate of #9 EXPANDED METAL.  Grate is supported to allow a 500 LB. working capacity.

DOOR OPENING: 24" HIGH x 24" DEEP (nominal)

DOORS: Two, full opening, double walled, swing type with self adjusting positive latches

GLOVES: Full length, cloth lined, abrasive and static resistant, mounted to an 7" padded port.

CABINET: Constructed of high quality 14 gauge, reinforced steel, with a working area of 48"W X 24"D X 24"H.

INSIDE BLAST AREA: 48" WIDE X 24" DEEP X 24" HIGH (nominal)

WINDOW: Safety tempered, 12 1/2" x 21" with quick change window frame replacable with no tools.

WORK SURFACE: A removable grate of #9 EXPANDED METAL.  Grate is supported to allow a 500 LB. working capacity.

DOOR OPENING: 24" HIGH x 24" DEEP (nominal)

DOORS: Two, full opening, double walled, swing type with self adjusting positive latches

GLOVES:  Full length, cloth lined, abrasive and static resistant, mounted to an 7" padded port.

DUST COLLECTION: A D-10 Pull Through Dust Collector is utilized on this unit. Blasting by-products are collected in a series of vertically mounted, closed end, dust bags suspended on a spring mounted holder. The Dust Bags are housed in a metal cabinet constructed of high quality steel, with a corrosion resistant enamel nish. Dust isshaken from the bags by a high frequency vibrator mounted on the bag holder. Standard control of the shaker
mechanism is by a manually operated air switch, or by an optional automatic shaker control. Dust removed by the shaking process is deposited in the dust sump. Dust and blasting by-products are easily removed for disposal by a slide valve located at the bottom of the sump.

ELECTRICAL: 120 volt single point connection through a standard electrical plug.
1.5 Cu.Ft. SME Coded Pressure Pot 48x24 Cabinet DC10 Dust Colletcor. Picture Frame Crated. $10,769.00