Head and Block Surfacing Machines

1. Get a smooth, controlled finish every time. Electrically Driven Traversing Table with a variable

speed table traverse and infinite speed control in each direction.

2. 24” between table and cutter plate. Roll over a 440 Chrysler block easily.

3. Power head traverse quickly positions head and eliminates operator fatigue.

4. Rigid cast iron base and table incorporate flat and v-way design for maximum accuracy and life.

5. Precision ball leadscrew increases sensitivity, accuracy, repeatability.

6. CBN milling, grinding or combination machines offer extreme versatility.

7. 13.5” Milling head with dual CBN Cutters.

8. Cast Iron “box” type columns with dovetail ways extend durability and precision.

9. High precision spindle bearings and heavy-duty precision construction allow operator to achieve

10. low RA surface finishes, and factory desired micro-inch finish with ease.

11. Ready to use with standard tooling of universal head and block fixturing, including cylinder head

and block

mounting plate, universal rollover fixture and parallel supports

Specifications:

Table Travel: 41" (1041mm)

Diameter of Wheelhead 13.75" (349mm)

Diameter of CBN Milling Head 13.5" (343mm)

Wheel Head H.P. 5 HP (0.75-3.75 KW)

Wheelhead Speeds, RPM 800 & 1600

Variable Table Traverse 0-64 IPM (0-1568mm per minute)

Min. Wheel to Table 4.14" (105mm)

Max. Wheel to Table 24.4 (620mm)

Spindle Clearance to Column 9.84" (250mm)

Control Voltage 115 VAC (24 V)

Electric Pump (0.12 KW)

LxWxH (Packing) 78x41x86" (1970mm x 1035mm x 2190mm)

Weight 2,105 lbs (952 kg)

Shipping Weight 2,343 lbs (1,060 kg)

Heavy Duty Box Ways - Cast Column - Variable Speed Electric Ball Screw Drive - 41 inch table travel 24 inch working height-13.75 inch CBN PCD Milling Head

440 Chrysler block rolls from left to right bank for decking. BHJ compatable. Mill Automotive, light truck, Medium Diesel heads and blocks. Cast and aluminum Super fine finishes.

Winona Van Norman has out sold the competition since the early 50'S. We started out with the 562 surface grinders then introduced the 570 broach in the 60'S. Many of these machines are still in service 50 years later. In the late 70'S the SM series over head surfacers were introduced then up dated in the 80 'S for CBN and PCD surfacing. The SM101 has been introduced incorporating all the latest CBN PCD features at a price set to discourage the purchase of used machinery.

If your looking for a high quality milling machine with all the right features, brand new with a factory warranty look no further contact us today for our lease purchase plan details.